OHSAS Consultant & Training - Konsultan OHSAS Indonesia » iso consultant

Training SMK3 – Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001 Batch VII, Jakarta & Surabaya 5 – 6 Agustus 2010

admin — Fri, 11 Jun 2010 10:55:10 +0000

Pada tahun 1996, Menteri Tenaga Kerja Republik Indonesia mengeluarkan Peraturan Menteri Tenaga Kerja Nomor : PER.05/MEN/1996 tentang Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3). Dimana pada pasal 3 Peraturan Menteri tersebut menjelaskan bahwa setiap perusahaan yang mempekerjakan tenaga kerja sebanyak 100 orang atau lebih dan/atau mengandung potensi bahaya yang ditimbulkan oleh karakteristik proses atau bahan produksi yang dapat menyebabkan kecelakaan kerja seperti peledakan, kebakaran, pencemaran dan penyakit akibat kerja, wajib menerapkan SMK3.

MANFAAT TRAINING SMK3
Setelah mengikuti training SMK3 ini, diharapkan peserta akan dapat
1. Memahami persyaratan sistem manajemen Keselamatan dan Kesehatan Kerja berdasarkan SMK3 (Permenaker 05/1996)
2. Mampu melakukan gap analysis penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja di perusahaan
3. Menyediakan, mengimplementasikan dan memelihara Sistem Manajemen Keselamatan dan Kesehatan Kerja

GARIS BESAR TRAINING SMK3

1. Dasar – dasar Keselamatan dan Kesehatan Kerja
2. Maksud dan Tujuan SMK3/OHSAS 18001:2007
3. Pengenalan dan interpretasi Sistem Manajemen SMK3/OHSAS 18001:2007
4. Metode Penyusunan SMK3
5. Mengelola Kinerja SMK3 di tempat kerja
6. Hazard Identification and Risk Assessment
7. Implementasi dan Sertifikasi SMK3

SIAPA YANG PERLU MENGHADIRI?
Operation/Production Manager, HRD Manager, Training and Development Manager, Management Representative (MR), Superintendent/Supervisor, Para Praktisi K-3, Dan semua yang terkait dalam pengembangan K-3 di perusahaan

DURASI
14 jam efektif (2 hari kerja)

TRAINER :
Ir. Tagar Nusapitu, MM. Perjalanan karir profesional beliau dimulai sejak menjadi Laboratory, Safety & Environment Engineer di Styrindo Mono Indonesia dan Product Development and Application Engineer di PT. Polytama Propindo, yang keduanya merupakan perusahaan Petrokimia. Sejak bergabung di PT Acumen Indonesia (2002 – 2004), maupun sebagai independent consultant sejak Maret 2004, beliau sudah membantu lebih dari 118 perusahaan dalam training maupun konsultasi penerapan ISO 9001, ISO 14001 OHSAS 18001, maupun Sistem Manajemen QHSE yg terintegrasi (ISO 9001, ISO 14001 & OHSAS 18001). Aktif sebagai salah satu pengurus dalam Asosiasi Ahli Keselamatan dan Kesehatan Kerja Konstruksi Indonesia (A2K4I), dan sebagai assessor dalam organisasi A2K4-I tersebut. Beliau bergabung di PT. Phitagoras Global Duta sejak tahun 2005.

JADWAL TRAINING SMK3:

Jakarta, 11 – 12 Februari 2010
Jakarta, 22 – 23 April 2010
Bandung, 10 – 11 Juni 2010
Jakarta dan Surabaya, 5 – 6 Agustus 2010 (diselenggarakan secara bersamaan di dua kota)
Yogyakarta, 7 – 8 Oktober 2010
Bandung, 22 – 23 Desember 2010

INVESTASI
Pendaftaran per peserta Rp. 3.500.000,-
Pendaftaran & Pelunasan 2 minggu sebelum training Rp. 3.250.000,-
Gratis orang ke 5, untuk pendaftaran 4 orang dari satu perusahaan
Modul Training yang berkualitas (hardcopy dan softcopy), Training Kit: tas, Block Note, ballpoint, termasuk jaket atau t shirt, Lokasi training yg nyaman di hotel berbintang empat / lima, Makan Siang, coffee / tea break,Sertifikat,Flash disk berisi materi training, Foto bersama seluruh peserta

TESTIMONIAL PESERTA:

“Secara keseluruhan, para peserta sangat terkesan kepada instruktur yang begitu jelas,luas,benar,memberikan solusi bila terdapat masalah yang dilamani peserta” Sunyoto, PT. Pertagas Area Sumbagsel

“Secara menyeluruh baik instruktur, materi dll kami menilai sangat memuaskan” Ir. Suriansyah, Balai Besar Teknologi Kekuatan Struktur (B2TKS) BPPT

“Apa yang kami dapatkan di training ini sangat membantu kami agar lebih baik dalam menerapkan SMK3? Fevin Novendra, PT. Indomulti Karya

“This training provides me new information and knowledge. its important will be much and applicable in performing my daily activities on safety, health and environment.” Rasmal Safri, PT. Internasional Nickel Indonesia

“Setelah mengikuti training ini, saya mendapatkan banyak ilmu pengetahuan tentang peraturan & manajemen K3 serta didukung trainer yang sangat berpengalaman dan interaktif, baik, penuh perhatian dan berwibawa. selain itu juga didukung panitia yang ramah, berdedikasi dan berpenampilan menarik.” Subari, PT. Surveyor Indonesia – Total E&P Indonesie

“Suasana yang nyaman dan bersahabat membuat pelatihan selama dua hari terasa sangat singkat.” Virgo Lelono, PT. Prima Multi Trada

“Topik training yang menarik dan banyak manfaatnya untuk diterapkan ditempat kerja.” Edwin Ahmad, PT. Global Tri Jaya Mandiri Utama

“Saya terkesan dengan training phitagoras berkaitan dengan bahan SMK3 ini karena dipandu oleh tutor yang berpengalaman dan mengangkat beberapa kasus & kondisi di beberapa bidang/operasi perusahaan.” Yohannes Cahyo Nan Wicaksana, PT. Quest Geophysical Asia

“Saya sangat terkesan dengan mengikuti program training ini karena menambah pengetahuan mengenai SMK3 semoga dilain waktu bisa ikut program HSE lainnya.” Yudi Leonardi, PT. Surveyor Indonesia

“Training berjalan sangat baik, penyampaian materi diberikan dengan sangat baik dan dari segi waktu pelaksanaan training sangat fleksibel.” Rezki Mulia Bahar, PT. SChlumberger GN

“Memberikan pengetahuan dan pengajaran yang baik kepada yang kurang paham tentang ohsas ini.” Vivia Macenda, PT. SChlumberger GN

“Kesan Terbaik adalah instruktur training membawakan training dengan santai sehingga suasana training tidak kaku dan mudah di cerna bahan training. peserta training juga sangat ramah sehingga training terasa menyenangkan.” Yunita Ardina Putri. ST, PT. Grand Telecomm

“Secara keseluruhan pelaksanaan training sudah baik, penyelenggaraan bagus, lokasi/tempat traning (Hotel) representatif.” Kawiarso, PT. Asahimas Chemical

“Trainer cukup interaktif, suasana training (interaksi antar peserta) sangat baik, tempat dan lokasi training juga ok.” Yunus Fransiscus, Pusat Studi Lingkungan

“Terima kasih, saya lebih mengetahui tentang SMK3 dan diadakannya perlatihan yang di selenggarakan oleh PT. Phitagoras.” Sinar Simbolon, PT. Asmin Koalindo Tuhup

“Instruktur sangat baik sekali dalam menyajikan training secara keseluruhan, tidak membosankan dan dapat menghidupkan suasana, dan materi yang disampaikan mudah di pahami dan dapat dibuat menjadi simple dan sistematis.” Eron Suwantra S.Mi, PT. Pacific Lubritama Indonesia

“trainer/instrukturnya asyik (Low Profile) dan peserta lain sangat komunikatif sehingga membangun suasana pembelajaran yang baik dan menyenangkan.” Trisakti I, PT. Asahimas Chemical

“Training SMK3 penuh dengan rasa kekeluargaan, training jadi tidak menjenuhkan” Reko Sutanto, PT. Berkah Mirza Insani

REFERENSI

1. PT. Optima Telcoindo
2. PT. Jaya Real Property Tbk
3. PT. Tunas Komindo Persada
4. AIP CEPA, PT (Persero) Pengerukan Indonesia Cabang Jakarta
5. PT. Afisco, PT. Quest Geophysical Asia
6. PT. Infomedia Nusantara
7. PT. Prismas Jamintara
8. PT. Bridgestone Kalimantan Plantation
9. PT. Simentari Abhdi Bina
10. PT. Kubik Madani
11. PT. Antariksa Karya Utama
12. PT. Veritas DGC Mega Pratama
13. PERUM BULOG
14. PT. United Technindo Selaras
15. PT. Danwo Steel Sejati
16. Balai Diklat Kehutanan Samarinda
17. PT. Alstom Transport Indonesia
18. PT. Bintang Permata Semesta
19. PT. Smart Tbk
20. PDAM Tirta Benteng Kota Tangerang
21. PT. Pan Maritime
22. PT. Bank Permata
23. PT. Indo Multi Karya
24. PT. Telekomunikasi Indonesia
25. Balai Besar Teknologi Kekuatan Struktur (B2TKS) BPPT
26. Pertamina Gas
27. PT. Nenggala Karya
28. PT. Pelayaran Menaratama Samudra Indah
29. PT. PSDM Proklamasi
30. PT. Hagihara Westjava Industries
31. PT. Surveyor Indonesia
32. PT. Global Tri Jaya Mandiri Utama
33. PT. Bredero Shaw Indonesia
34. PT. Internasional Nickel Indonesia
35. PT. Prima Multi Trada
36. PT. Schlumberger GN
37. PT. Inspektindo Pratama
38. PT. Asahimas Chemical
39. BP MIGAS
40. PT. Grand Telecomm
41. PT. Pacific Lubritama Indonesia
42. PT. Berkah Mirza Insani
43. PT. Kurhanz Trans
44. Pusat Studi Lingkungan
45. PT. Bravo Humanika Perkasa
46. PT. Pfizer Indonesia
47. FKM Unair – Surabaya
48. PT. Asmin Koalindo Tuhup
49. PT. Dinamika Energi Tama Nusantara

Download Silabus Disini

Safety Training Indonesian

Training CSMS – Contractor Safety Management System Batch VIII, Bali 13 – 15 Oktober 2010

admin — Sat, 29 Aug 2009 04:49:49 +0000

Sistem Manajemen Kesehatan & Keselamatan Kerja (K3) merupakan sesuatu yg bersifat mandatory untuk Contractors, Vendors dan Suppliers yang bergerak di Industri Oil & Gas. Kinerja Sistem Manajemen K3 organisasi para Contractor, Vendor dan Supplier akan diaudit terlebih dahulu sebelum mendapatkan kontrak. PT. Phitagoras Global Duta bermaksud untuk berbagi pengalaman tentang bagaimana memahami dan menerapkan Sistem Manajemen Kesehatan & Keselamatan Kerja untuk organisasi anda.

MANFAAT TRAINING CSMS / CONTRACTOR’S SAFETY MANAGEMENT SYSTEM
1. Untuk memperkenalkan program CSMS, elemen serta persyaratannya
2. Membantu kontraktor untuk mempersiapkan diri dan memenuhi persyaratan CSMS
3. Membantu membina kontraktor meningkatkan sistem K3

GARIS BESAR PROGRAM TRAINING CSMS / CONTRACTOR’S SAFETY MANAGEMENT SYSTEM
1. Introduksi CSMS
2. Konsep CSMS
3. Tujuan CSMS
4. Proses CSMS
1) Risk Assessment
2) Pre – Qualification Process
3) Selection and Job Awarded
4) Pre Job Activity
5) Work in Progress
6) Final Evaluation
5. HSE Program

SIAPA YANG PERLU MENGHADIRI?

HSE Manager/Supervisor/Superintendent, Operation/Production Manager, HRD Manager, Training and Development Manager, Management Representative (MR), Superintendent/Supervisor, dan semua yang terkait dalam pengembangan Health, Safety, Environment (HSE) di perusahaan

DURASI
21 jam efektif (3 hari kerja)

TRAINER :
Senior Consultant Phitagoras

JADWAL TRAINING CSMS – CONTRACTOR’S SAFETY MANAGEMENT SYSTEM

Jakarta, 22 – 24 Maret 2010
Bali, 7 – 9 Juli 2010
Bali, 13 – 15 Oktober 2010
Yogyakarta, 15 – 17 Desember 2010

INVESTMENT
Pendaftaran per peserta Rp. 6.000.000,-
Pendaftaran & Pelunasan 2 minggu sebelum training Rp. 5.750.000,-
Gratis orang ke 5, untuk pendaftaran 4 orang dari satu perusahaan
Modul Training yang berkualitas (hardcopy dan softcopy), Training Kit: tas, Block Note, ballpoint, termasuk jaket atau t shirt, Lokasi training yg nyaman di hotel berbintang empat / lima, Makan Siang, coffee / tea break,Sertifikat,Flash disk berisi materi training, Foto bersama seluruh peserta

TESTIMONIAL PESERTA:

“Instruktur yang menguasai materi dan penyampaian materi yang baik dan dapat di mengerti” Fajar Eka Rachman Telaumbauna, Project Engineer. PT. Medco E&P Indonesia

“Mencerahkan dan sangat membantu peserta dalam penanganan SMK3 kontraktor ke depannya” Zainal Abidin, Project Site Engineer. PT. Medco E&P Indonesia

“Asyik, karena banyak diskusi, muter film dan sharing knowledge” Chendy Octaviani Yudhi, Project Site Engineer. PT. Medco E&P Indonesia

“Instruktur dan bahan/materi training yang disampaikan sudah sesuai dan instruktur sangat menguasai” Indra Jaya, Direktur PT. Karinda Corporindo

“Training CSMS ini sangat bermanfaat untuk improvement safety di perusahaan saya bekerja dan secara personal menambah skill saya di bidang HSE. Saya bisa mengimplementasikan program-program baru yang saya peroleh dan tidak ragu lagi dalam memenuhi permintaaan client” Ferawati, HSE Coordinator. PT. Aghaton Mandiri

REFERENSI
1. PT.Pelita Anugrah Bahari
2. PT.Geolog Indonesia
3. PT.Fajar Mas Murni
4. PT. QUI Handika
5. PT. Java Velosi Mandiri
6. Kondur Petroleum S.A
7. Trimatra Jaya Persada
8. PT. Asaba Computer Centre
9. PT. Batara Mega Krida Kencana
10.NGO Caritas Switzerland
11.PT. Sud Chemie Indonesia
12.PT. Radiant Utama Interinsco, Tbk
13.LAPI ITB
14.PT. Adaro Indonesia
15.CNOOC SES Ltd
16.PT. Indominco Mandiri
17.PT. Baharu Penta Kencana
18.PT. Cipta Kridatama
19.PT. Koin Pratama
20.PT. Pamapersada Nusantara
21.PT. Bukit Asam (Persero)
22.PT. National Oilwell Varco
23.PT. Bina Rasano Engineering

24. PT. Aghaton Mandiri
25. PT. Karinda Corporindo
26. PT. Medco E&P Indonesia

Download Silabus Disini

Safety Training Indonesian

Training Chemical Controls in Industry

admin — Fri, 06 Feb 2009 04:47:01 +0000

ILO – Chemicals have become a part of our life, sustaining many of our activities, preventing and controlling many diseases, increasing agricultural productivity. However one can not ignore that many of these chemicals may, especially if not properly used, endanger our health and poison our environment. It has been estimated that approximately one thousand new chemicals come onto the market every year, and about 100.000 chemical substances are used on a global scale.
These chemicals are usually found as mixtures in commercial products. One to two million such products or trade names exists in most industrialized countries. More substances and rising production mean more storage, transport, handling, use and disposal of chemicals. The whole lifecycle of a chemical should be considered when assessing its dangers and benefits.
The environment may be affected, chemicals may pollute the air we breathe, the water we drink, and the food we eat. They may have entered into forests and lakes, destroying wildlife and changing the ecosystems. Chemicals are not all of equal concern. The assessment of health risks of chemical substances is a continuous process where information of the chemical hazards is made available through a variety of sources. Remember: chemicals have power, and that is why they have become an important part of our life. Respect that power and handle them with care.

OBJECTIVES
This course will enable you to:
o Develop an understanding of recognition methods and control methods for Chemicals exposure;
o Identify jobs that can potentially pose a risk of adverse of health to chemical exposure;
o Plan workplace noise surveys and personal noise exposure measurements;
o Understand chemical health risk assessment (CHRA) and identify needs for further action;
o Develop and implement an effective for Controlling Workplace exposure

COURSE PROGRAMMES
1. Chemical Health Risk Assessment
2. Chemical Controlling Workplace Exposure
3. Hazard Communication
4. Substitution, Isolation, Ventilation
5. Housekeeping and Spill Clean Out
6. Personal Protective Equipment (PPE)
7. Chemical Sampling (Air & Wipe)
8. Health Surveillance

WHO SHOULD ATTEND ??
Courses are aimed at workers, supervisors, managers, health and safety committee members, health and safety representatives, Human Resources (HR) professionals, industrial hygienists, occupational health and safety nurses and others with an interest in controlling chemical exposure in the workplace.

DURATION
14 hours effectif (2 days)

TRAINER
Dr. Abdul Baktiansyah,MKK
He has experienced in Occupational Health& Safety and Industrial Hygiene for almost 30 years. He was graduated from Faculty of Medicine, Airlangga University in 1979 and Master of Science in Occupational Medicine, University of Indonesia in 2004. He started his career as Occupational Health practicioner at PT. Ekspan Kalimantan, he later became Chief Medical Officer and then Occupational Health & Industrial Hygiene Coordinator at PT. Medco Energy. His Expertise and experienced give him a very broad perspectives in handling any issues related to Occupational Health and Industrial Hygiene.

SCHEDULE
1) Jakarta, 24 – 25 February 2009
2) Jakarta, 30 – 31 July 2009

INVESTMENT
Fee per participant Rp. 3.000.000,-
Register & Pay two weeks before Rp. 2.750.000,-
Group Registration (5 persons above) from one company Rp. 2.500.000,-

Safety Training Indonesian

Training Protecting Workers from Occupational Health Problems

admin — Mon, 15 Sep 2008 04:26:44 +0000

The prospect of Countries’s economy and the development of different industries depend on the efforts and co-operation of all parties. A healthy workforce is the key to our success. Employers, occupiers, employees, the Government and the relevant organizations should co-operate with each other to maintain a good working environment so as to protect our health. In order to raise the occupational hygiene standards of the working environment and enhance the health of employees, the course has been prepared to assisting employers from all walks of life to promote occupational health in their own. Through this course employers can grasp the fundamentals of occupational health management, i.e. maintaining good occupational hygiene practice, preventing diseases and keeping good physical and mental health. By adhering to these basic principles, employers can raise productivity and create wealth.

OBJECTIVES
The specific objectives of this course were to :
o Understand factors that influence the health and safety in the workplace.
o Prevent the workers from Occupational Illness
o Understand to implement Occupational Health Management Programs
o Promote education and training for workplace health.

COURSE PROGRAMMED:
1. Roles and Responsibilities
2. Occupational / Work-Related Diseases
3. Management of Occupational Health.
4. Implement of Occupational Health Management Programs
5. Prevention of Occupational / Work-Related Diseases.
6. Physical Fitness and Work.

WHO SHOULD ATTEND
Courses are aimed at workers, supervisors, managers, health and safety committee members, health and safety representatives, Human Resources (HR) professionals, industrial hygienists, occupational health and safety physician / nurses and others with an interest in studying of occupational health problems in the workplace.

DURATION
Half Day Seminar

TRAINER
Dr. Abdul Baktiansyah,MKK
He has experienced in Occupational Health& Safety and Industrial Hygiene for almost 30 years. He was graduated from Faculty of Medicine, Airlangga University in 1979 and Master of Science in Occupational Medicine, University of Indonesia in 2004. He started his career as Occupational Health practicioner at PT. Ekspan Kalimantan, he later became Chief Medical Officer and then Occupational Health & Industrial Hygiene Coordinator at PT. Medco Energy. His Expertise and experienced give him a very broad perspectives in handling any issues related to Occupational Health and Industrial Hygiene.

SCHEDULE:
1) Jakarta, 16 April 2009
2) Jakarta, 2 December 2009

INVESTMENT
Fee per participant Rp. 800.000,-

Safety Training Indonesian